Maintenance of flame retardant conveyor belts

Release time:

2023-01-14

Flame retardant conveyor belts should be kept clean during transportation and storage, avoid direct sunlight, rain and snow, prevent contact with substances that affect the quality of rubber such as acids, alkalis, oils, and organic solvents, and keep them 1 meter away from heating devices outside.

Maintenance of flame retardant conveyor belts

1. Flame retardant conveyor belts should be kept clean during transportation and storage, avoid direct sunlight, rain and snow, prevent contact with substances that affect the quality of rubber such as acids, alkalis, oils, and organic solvents, and keep them 1 meter away from heating devices outside.

2. During storage, the temperature in the warehouse should be kept between -15℃-+40℃, and the relative humidity should be kept between 50-80%.

flame retardant conveyor belts

3. Flame retardant conveyor belts must be placed in rolls during storage and must not be folded. During storage, they should be turned once a quarter.

4. The running speed of flame retardant conveyor belts should not be greater than 5.0 m/s, and the speed should be as low as possible when transporting bulky and abrasive materials and using a fixed plow unloading device. When the specified speed is exceeded, the service life of the tape will be affected.

5. The relationship between the diameter of the transmission roller of the conveyor and the fabric layer of the flame retardant conveyor belts, the matching of the transmission roller and the reversing roller and the requirements for the groove angle of the idler should be reasonably selected according to the design regulations of the conveyor.