What problems can be solved by the water cleaning tank (water cleaning tank) used in belt conveyor?

Release time:

2025-05-17

Problem: The surface dust, suspended particles and backhaul materials brought by the return of the belt increase the cleaning time and environmental protection cost of operation.

What problems can be solved by the water cleaning tank (water cleaning tank) used in belt conveyor?

Problem: The surface dust, suspended particles and backhaul materials brought by the return of the belt increase the cleaning time and environmental protection cost of operation.

Solution: It is recommended to use KEZHIRUN® water cleaning box/water cleaning box. The cleaning box is equipped with a series of belt cleaning parts, including spray rod, rotating brush, belt cleaner and air knife.

(9mm carbide alloy blade)

(Rinsing nozzle in scraping area)

(Belt tension spring)

Test Results:

Traditional belt conveyor cleaning methods involve using a sweeper installed at the discharge point of the conveyor head to clean material particles adhering to the return working surface. The effectiveness of the sweeper largely depends on the characteristics of the material, the condition of the belt surface, the material of the sweeper blade, and the degree of contact between the blade and the belt surface. Especially when cleaning small, sticky particles, there are often some smaller sticky materials that remain uncleaned and adhere to the return conveyor belt surface, causing material buildup on the return belt.

The intelligent cleaning water circulation system cleans the conveyor belt surface with high-pressure water while the sweeper is sweeping, removing fine particles. It also uses a water removal sweeper to eliminate residual water on the belt surface, effectively addressing this issue. The material rinsed off can be processed in a sedimentation tank, and the settled material enters the storage bin. The water, after being treated by the filtration cleaning device, is reused. This improves cleaning efficiency, is more environmentally friendly, and conserves resources.

Advantages:

★ The standard sweeper cleans the belt surface, and the high-pressure water flows deeply clean the belt surface to ensure that the fine dust is completely removed

★ Gas and liquid tension: in addition to the standard spring tension, the cleaning device can adopt a unique gas and liquid tension structure to maintain constant pressure

● The cleaning water has preliminary filtration to ensure the life of the system

● According to the running state of the conveyor belt, it can realize: intermittent running, continuous running, independent local running and remote auxiliary running

● Configure the timed flusher: after the material is piled up in the scraping area, the accumulated material is washed once

● There is an independent control system. The system device has interlocking and uninterlocking functions with the main system