How to prevent flame retardant conveyor belts material from tearing


Release time:

2023-02-16

We all know that the flame retardant conveyor belts material is the material carrier of the belt conveyor, which is one of the main parts of the conveyor, but there is often a problem when it is used, that is, tearing.

How to prevent flame retardant conveyor belts material from tearing

We all know that the flame retardant conveyor belts material is the material carrier of the belt conveyor, which is one of the main parts of the conveyor, but there is often a problem when it is used, that is, tearing. Tear can be said to be a fatal killer of the conveyor belt. Once the conveyor belt is torn, it must be stopped and replaced, which wastes a lot of time. Therefore, we must pay attention to the tear problem. So how can we prevent the conveyor belt from tearing?

flame retardant conveyor belts material

1. The conveyed raw materials contain sharp objects. These sharp objects are likely to scratch the conveyor belt. If the scratches are deep, they will easily appear when conveying materials, especially those heavy materials. The phenomenon of tearing.

2. Flame retardant conveyor belts material deviates in the direction. If the direction of the conveyor belt deviates, it will cause uneven force on the conveyor belt. Some areas have a large force, and some areas have a small force. In this case, it is very easy to tear where there is a lot of force.