What is the cause of flame rotardant conveyor belts products slipping


Release time:

2023-04-06

The tension of the flame retardant conveyor belts products leaving the roller is not enough to cause the conveyor belt to slip.

What is the cause of flame rotardant conveyor belts products slipping

1. The tension is too small

Reason: The tension of the flame retardant conveyor belts products leaving the roller is not enough to cause the conveyor belt to slip.

Solution: This kind of situation usually occurs when starting. The solution is to adjust the tensioning device and increase the initial tension.

flame rotardant conveyor belts products

2. Abnormal startup

Reason: flame retardant conveyor belts products will slip if they start too fast.

Solution: At this time, it can be started slowly, and it can be restarted after jogging twice, which can also effectively overcome the slipping phenomenon.

3. The tail roller bearing problem

Reason: The tail drum bearing is damaged and does not rotate or the upper and lower roller bearings are damaged and cannot rotate too much.

Solution: Flame retardant conveyor belts products overhaul and replace the damaged or inflexible parts, which will increase the resistance and cause slippage.